Subaru Legacy / Subaru Forester / Subaru Outback / Subaru Baja since 2000, repair e-manual (in Russian)
About the manual
Engine type: gasoline
Displacement: 2.5 L.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine type: gasoline
Displacement: 2.5 L.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Content
Instruction manual
- Introduction
- Seats, belts and airbags
- Keys, locks and window regulators
- Instrumentation and control systems
- Climate control
- Interior equipment
- Starting and driving
Introduction
- About this guide
- Introduction
- Vehicle identification numbers
- Modification encoding
- Acquisition of spare parts
- Methods of service, tools and work equipment
- Starting an engine from an auxiliary battery
- Lifting the jack and towing the car
- Service fluids and lubricants
- Conversion factors
- Translation of decimal values in inches to values in millimeters
- Safety first!
- Determining the causes of malfunctions
Daily care and maintenance
- Service schedule
- Introduction
- General recommendations for car care
- Checking the levels of fluids and lubricants
- Check of a condition and pressure of inflation of tires
- Replacement of engine oil and oil filter
- Inspection, maintenance and charging of the battery
- Rearrangement of wheels
- Inspection and replacement of wiper blades
- Inspection of the technical condition of the exhaust system
- Seat belt inspection
- Inspection and replacement of hoses that are in the engine compartment
- Inspection of the cooling system
- Checking the technical condition of the fuel system
- Checking the technical condition of the braking system
- Check of a technical condition of a steering and a suspension bracket, inspection of covers of power shafts
- Checking the condition and replacing the air filter
- Brake fluid replacement
- Inspection, adjustment and replacement of the drive belt
- Replacing the fuel filter
- Maintenance of the cooling system (draining, flushing and filling)
- Replacement of spark plugs
- Inspection of the ignition coil (turbocharged engines)
- Inspection and replacement of spark plug wires (engines without turbocharging)
- Replacing the transmission fluid in the automatic transmission
- Changing the oil of a manual gearbox
- Replacing differential oil
- Checking the performance of wheel bearings
Engines
- General information
- Repair operations without removing the engine
- The top dead center (TDC) of the piston of the first cylinder is the location
- Valve mechanism covers - removing and installing
- Intake manifold - removal and installation
- Exhaust manifold - removal and installation
- Toothed belt and sprockets - removal, inspection and installation
- Systems of correction of phases of a gas-distributing mechanism and throughput of valves
- Crankshaft front oil seal - replacement
- Camshaft oil seals - replacement
- Camshafts and valve mechanism parts - removal, inspection and installation
- Cylinder heads - removing and installing
- Valve clearance - check and adjustment
- Pallet - removal and installation
- Oil pump - removal, inspection and installation
- Handwheel / drive plate - removal and installation
- Rear main engine oil seal - replacement
- Engine mountings - inspection and replacement
Major engine repairs
- General information - overhauling the engine
- Checking the oil pressure
- Compression check in engine cylinders
- Diagnosis with measurement of the degree of dilution
- Alternative methods of engine restoration
- Engine removal - methods and precautions
- Engine - removal and installation
- Engine overhauling - sequence of disassembly
- Pistons - removal and installation
- Carter - department
- Crankshaft and connecting rods - removal
- Connecting rods and bearings - removal
- Engine overhaul - assembly sequence
- Connecting rods and bearings - installation and inspection of oil clearance
- Crankshaft and main bearings - installation and inspection of oil clearance
- Carter assembly
- Piston rings - installation
- Pistons - installation
- The first start-up and engine break-in after major overhaul
Cooling, heating and air conditioning systems
- General information
- Antifreeze - general information
- Thermostat - check of working capacity and replacement
- Cooling fan and relay - operation check, removal and installation
- The radiator, as well as the expansion tank and the filler tank - removal and installation
- Cooling pump - performance test
- Pump of cooling system - replacement
- Coolant temperature gauge - operation check
- Resistor and electric motor of the heater fan - replacement
- Heat exchanger for heater - removal and installation
- Control panel for heating and air conditioning - removal and installation
- Air conditioning and heating systems - operation and maintenance check
- The filter - the dehumidifier of an air conditioning system - removal and installation
- Air conditioning compressor - removal and installation
- Condenser for air conditioning - removal and installation
- Cooling channel - removal and installation
Fuel and exhaust system
- General information
- Pressure relief in the fuel system
- Fuel pump / fuel pressure check
- Fuel lines and their connectors - replacement
- Fuel pump / fuel level sensor - removing and installing
- Fuel pump / measuring block / fuel filter - replacement
- The separate measuring block of the fuel system - removal and installation
- Fuel tank - removal and installation
- Cleaning and refueling the fuel tank - general information
- Air cleaner - removal and installation
- Accelerator cable - removal and installation
- Multipoint fuel injection (MFI) - general information
- Fuel injection system - general condition check
- Throttle unit - removal and installation
- Fuel pressure regulator - Removing and installing
- Fuel receiver and nozzles - removal and installation
- Turbocharger - description and technique of inspection
- Bypass valve - removal and installation
- Intercooler - removing and installing
- Turbocharger - removal and installation
- Maintenance of the exhaust system - general information
Engine electrical systems
- general Information
- Battery - emergency start from external battery
- Battery - inspection and replacement
- Battery wires - inspection and replacement
- Ignition system - general information and precautions
- Ignition system - operation check
- Ignition coil - operation and replacement test
- Charging system - general information and precautions
- Charging system - operation check
- Generator - removal and installation
- Launch system - general information and precautions
- The starter and its electrical circuit - performance check
- Starter - removal and installation
Exhaust gas control and engine control systems
- General information
- On-board diagnostic system (OBD) and DTCs
- Accelerator pedal position sensor (APP) - replacement
- Barometric pressure sensor (BARO) - replacement
- The camshaft position sensor (CMP) is a replacement
- Clutch pedal position sensor (CPR) - replacement
- Crankshaft position sensor (TFR) - replacement
- Coolant temperature sensor (ECT) - replacement
- Exhaust temperature sensor - replacement
- Supply air temperature sensor (IAT) - replacement
- The supply air temperature sensor (IAT) / absolute pressure in the manifold is a replacement
- Detonation sensor - replacement
- Manifold absolute pressure sensor (MAP) - replacement
- Airflow / supply air temperature sensor (MAF / IAT) - replacement
- Oxygen sensors - general information and replacement
- Hydraulic power steering system pressure sensor (PSP) - replacement
- Throttle position (TP) sensor - replacement
- Selector lever (TR) - replacement and adjustment
- Vehicle speed sensor (VSS) - replacement
- Engine control module (PCM) - replacement
- Electro-valve of the system of additional air injection - replacement
- Idle valve (IAC) - replacement
- Catalytic converters - description and replacement of elements
- Fuel vapor recovery system (EVAP) - general description and replacement of elements
- The EGR system is a general description and replacement of elements
- Crankcase ventilation system (PCV) - general description and replacement of elements
- Additional air injection system - general description and replacement of elements
- Swirl device for fuel-air mixture at engine start-up - general description and replacement of elements
- Valve change system - general description and replacement of elements
- Camshaft timing correction system - general description and replacement of elements
Manual transmission
- General information
- Replacement of oil seals
- Gear lever - removal and installation
- Reverse and neutral position sensors - functionality and replacement check
- Transmission supports - inspection and replacement
- Manual gearbox - removing and installing
- Mechanical transmission repair - general information
- Automatic transmission
- General information
- Diagnosis - general information
- Selector cable - inspection, replacement and adjustment
- Selector lever - replacement
- Automatic transmission lock system (BTSI) - description, element replacement and adjustment
- Transmission control unit (TCM) - removal and installation
- Automatic gearbox - removal and installation
- Automatic transmission repair - general information
Clutch and transmission
- General information
- Clutch - description and verification
- Clutch master cylinder - removal and installation
- Clutch slave cylinder - removing and installing
- Hydraulic clutch system - pumping
- Clutch elements - removal, inspection and installation
- Release bearing - removal, inspection and installation
- Guide bearing - inspection and replacement
- Clutch engaging sensor - inspection and replacement
- Shafts and joints of cardan gear, as well as drive shafts of transmission - general information
- Preventive inspection of transmission elements
- Drive shaft - removal and installation
- Central bearing - replacement
- Rear seal gear oil seal - replacement
- Drive shafts - removal and installation
- Replacement of drive shaft covers
- Seals of rear differential gears - replacement
- Rear differential - removal and installation
Brake system
- General information
- Disc brake pads - replacement
- Disc brake caliper - removal and installation
- Brake disc - inspection, removal and installation
- Brake shoe pads - replacement
- Service brake cylinder - removal and installation
- Master cylinder - removal and installation
- Hoses and pipes of brake system - inspection and replacement
- Distributor valve - replacement
- Hydraulic braking system - pumping
- Handbrake cable - adjustment, removal and installation
- Vacuum brake booster - performance check, removal and installation
- Brake shoes (cars with rear disc brakes) - inspection and replacement
- Deceleration system on the slope - adjustment and replacement of elements
- Stop light sensor - replacement
- Brake pedal adjustment
- Anti-lock braking system - general information
Suspension and steering
- General information
- Shock absorber / spring (front) - removal and installation
- Suspension spring / spring - replacement
- Stabilizer of lateral stability (front) and its thrust - removal and installation
- Suspension lever (front) - removal and installation
- Ball joints - inspection and replacement
- Rotary fist and hub (front) - removal and installation
- Hub and bearing (front) - removing and installing
- Shock absorber / spring (rear) (Forester) - removal and installation
- Shock absorber / suspension spring (rear) (Legacy / Outback) - removal and installation
- Stabilizer of lateral stability (rear), its bushings and thrust - removal and installation
- Longitudinal suspension arm - removal and installation
- Thrust of rear suspension - removal and installation
- Hub and bearing (rear) - replacement
- Rear pin / hub - removal and installation
- Steering wheel - removal and installation
- Tips of steering rods - removal and installation
- Power steering pads - replacement
- Steering gear - removal and installation
- Power steering pump - removal and installation
- Steering column - removal and installation
- Hydraulic power steering system - pumping
- Wheels and tires - general information
- Wheel alignment angles - general information
Car body
- General information
- Body - service
- Vinyl cladding - maintenance
- Upholstery and carpets - maintenance
- Body repair - minor damage
- Body repair - serious damage
- Loops and locks - maintenance
- Wind and fixed glass - replacement
- Hood cover - removal, installation and adjustment
- Latch and bonnet bonnet cable - removal and installation
- Radiator grille - removal and installation
- Bumper covers - removal and installation
- Front wing - removal and installation
- Facing panels of doors - removal and installation
- Doors - removal, installation and adjustment
- Door handles, lock cylinder and latch - removal and installation
- Glasses of door windows - removal and installation
- Power window and electric motor - removal and installation
- External mirrors - removal and installation
- Trunk lid - removing and installing
- Latch and cylinder lock lid - removal and installation
- Rear hinged door racks - removing and installing
- Rear hinged door - removal, installation and adjustment
- Latch and outer handle of the rear hinged door - removal and installation
- Covers of a casing of a steering column - removal and installation
- Central console - removal and installation
- Dashboard cover
- Instrument panel - removal and installation
- Air intake trim - removal and installation
- Seats - removal and installation
- Body dimensions
Electrical equipment of a car
- General information
- Determining the causes of faults in electrical circuits - general information
- Fuses and inserts, as well as circuit breakers - general information
- Circuit breaker / hazard warning light interrupter - operation check and replacement
- Relay - general information and validation
- Switches located on the steering column - replacement
- Switch and ignition lock cylinder - operation check and replacement
- Switches located on the dashboard - replacement
- Instrument panel - removal and installation
- Car radio and speakers - removing and installing
- Antenna - removal and installation
- Windscreen wipers - replacement
- Rear window heater - performance check and repair
- Headlamp bulbs - replacement
- Headlamps - removal and installation
- Headlights - adjustment
- Lamp replacement
- Signal replacement
- Side mirrors with electric drive - description
- Speed-keeping system - description
- Power windows - description
- Automatic door locks - description
- Daylight-saving lighting (DRL) - general information
- Airbag system - general information
- Wiring diagrams - general information
Alphabetical index