Lada / VAZ 2110 / 2111 / 2112 since 1996, repair e-manual (in Russian)
Only original manuals
Available immediately after payment
Full compliance with the paper edition
100% protection of your payments
(9)
9
10
2
Publisher: © "Za Rulem"
ISBN: 978-5-9698-0341-1
Number of pages: 296
Format: file PDF
About the manual
Engine type: 2110 / 2111 / 2112 / 21114 / 21124
Engine capacity: 1.5 / 1.6 l.
Power: 52 / 57.2 / 54.6 / 66.7 / 59 / 65 kW
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Only original manuals
Available immediately after payment
Full compliance with the paper edition
100% protection of your payments
Publisher: © "Za Rulem"
ISBN: 978-5-9698-0341-1
Number of pages: 296
Format: file PDF
About the manual
Engine type: 2110 / 2111 / 2112 / 21114 / 21124
Engine capacity: 1.5 / 1.6 l.
Power: 52 / 57.2 / 54.6 / 66.7 / 59 / 65 kW
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Content
Instruction manual VAZ 2110
General information
Safety precautions
Diagnostics of malfunctions
- Diagnostics of malfunctions of the engine and its systems
- Clutch fault diagnosis
- Gearbox diagnostics
- Diagnostics of malfunctions of drives of front wheels, running gear, steering and brake system
- Diagnostics of body malfunctions
- Battery diagnostics
- Diagnostics of malfunctions of the generator
- Diagnostics of starter malfunctions
- Diagnostics of malfunctions of systems of ignition and EPHH. engine management systems
- Diagnostics of malfunctions of lighting and light alarm
- Wiper diagnostics
- Diagnostics of malfunctions of a element of heating of a back glass
- Sound alarm diagnostics
- Diagnostics of malfunctions of the cooling fan motor
- Diagnostics of malfunctions of control lamps and devices
- Diagnostics of malfunctions of the heating and ventilation system
Engine
- Engine VAZ-2111
- Engine VAZ-2110
- Engine VAZ-2112
- Changing the engine oil
- Replacement timing belts for VAZ-2110, -2111 engines
- Replacing the timing belt on the VAZ-2112 engine
- Adjustment of thermal clearances in the valve mechanism of the VAZ-2110, -2111 engine
- Replacement of hydraulic pushers of valves of the VAZ-2112 engine
- Removing the camshaft of engines VAZ-2110, -2111
- Replacing valve stem seals for engine valves VAZ-2110, -2111
- Replacing valve stem seals for VAZ-2112 engine
- Replacing the camshaft oil seal VAZ-2110, -2111
- Replacing the camshaft oil seal VAZ-2112
- Replacing the front crankshaft oil seal
- Replacing the crankshaft rear oil seal
- Removing the sensor indicator lamp oil pressure on the engine VAZ-2111, -2110
- Removing the sensor indicator lamp oil pressure in the VAZ-2112 engine
- Removing the engine oil level sensor
- Removing the receiver and manifolds of the VAZ-2111 engine
- Removing the receiver and intake manifold of the VAZ-2112 engine
- Removing the exhaust manifold of the VAZ-2112 engine
- Removing the intake and exhaust manifolds of the VAZ-2110 engine
- Removing the housing of auxiliary units of the VAZ-2110 engine
- Removing and disassembling the cylinder head of the VAZ-2111, -2110 engine
- Removing and disassembling the cylinder head of the VAZ-2112 engine
- Removing the oil pan
- Removing the engine oil intake
- Removing and disassembling the engine oil pump
- Dismantling the connecting rod and piston engine group in a car
- Removing the right support of the power unit
- Removing the left support of the power unit
- Removing the rear support of the power unit with the engine VAZ-2111, -2110
- Removing the front support of the power unit with the VAZ-2112 engine
- Removing the rear support of the power unit with the VAZ-2112 engine
- Removing the engine from the car
- Dismantling and assembling the engine
Cooling system
- Design description
- Coolant replacement
- Removing the coolant temperature sensor for the instrument cluster of engines VAZ-2111, -2110
- Removing and checking the thermostat
- Removing the expansion tank
- Removing the electric fan
- Removing the radiator
- Removing the coolant pump on VAZ-2111, -2110 engines
- Removing the engine coolant pump VAZ-2112
- Removing the sensor for turning on the electric fan of the VAZ-2110 engine
VAZ-2110 engine power system
- Fine fuel filter replacement
- Replacing the air filter
- Removing and disassembling the fuel pump
Carburetor Solex
- Design description
- Carburetor adjustment carburetor drive adjustment
- Fuel level adjustment in the float chamber
- Trigger adjustment
- Idle system adjustment
- Dismantling the carburetor removing the air filter housing
- Removing and checking the solenoid valve
- Removing the carburetor fuel filter
- Partial disassembly of the carburetor without removing it from the engine
- Dismantling the carburetor with removing it from the engine
- Replacing the diaphragm of a semi-automatic starter
Ignition and EPCH control systems for the VAZ-2110 Engine
- Removing and disassembling the ignition distribution sensor
- Ignition coil removal
- Removing the carburetor EPCH control unit and the ignition system switch
The power supply system of engines VAZ-2111, -2112
- Replacing the fuel filter of the VAZ-2111, -2112 engines
- Replacing the air filter
- Checking the pressure in the fuel system of the engine
- Removing the gasoline pump with a fuel level sensor
- Removing the fuel tank
- Removing the fuel pressure regulator of the VAZ-2111 engine
- Removing the fuel rail of the VAZ-2111 engine
- Removing the fuel rail and the fuel pressure regulator of the VAZ-2112 engine
- Removing engine injectors
- Checking engine injectors
- Removing the throttle actuator
- Throttle removal
- Removing the idle speed regulator
- Removing the air filter housing
- Removing the adsorber
Engine management system VAZ-2111, -2112
- Injection system controller
- Injection sensors
- Crankshaft position sensor
- Phase sensor
- Coolant temperature sensor
- Throttle position sensor (TPS)
- Mass air flow sensor
- Knock sensor
- Oxygen sensor (lambda sensor)
- CO potentiometer
- Vehicle speed sensor
- Ignition system
- Ignition module
- Spark plugs
- Injection fuses and relays
- The operation of the injection system
- Lamp "Check engine"
- Removing the controller, relays and fuses
- Removing the crankshaft position sensor
- Removing the engine phase sensor VAZ-2112
- Removing the coolant temperature sensor
- Removing the throttle position sensor
- Removing the mass air flow sensor
- Removing the knock sensor
- Removing the oxygen sensor
- Removing the speed sensor
- Replacement of spark plugs of engines VAZ-2111, -2110
- Replacing the spark plugs of the VAZ-2112 engine
- Removing the engine ignition module VAZ-2111
- Removing the engine ignition module VAZ-2112
Exhaust system
- Design description
- Removing the exhaust pipe of the VAZ-2110, -2111 engines
- Removing the intake pipe of the VAZ-2112 engine
- Neutralizer removal
- Removing the optional silencer
- Removing the main silencer
Grip
- Design description
- Removing and adjusting the clutch cable
- Replacing the clutch disc and clutch plate
- Removing clutch release mechanisms
Gearbox
- Design description
- Gearbox oil change
- Removing the gearshift drive and drive thrust
- Gearbox removal
- Replacing gearbox oil seals
- Gearbox disassembly and assembly
Front wheel drive
- Design description
- Removing front wheel drives
- Removing the outer joint
- Removing the inner joint
- Dismantling the hinge
Front suspension
- Design description
- Front wheel alignment
- Removing the ball joint
- Lever and stretch removal
- Removing the shock absorber strut and its disassembly
- Removing the anti-roll bar
- Replacing the silent-block cross member of the front suspension
- Removing the front suspension crossbar
- Replacing the front wheel bearing
Rear suspension
- Design description
- Removing the shock absorber and spring
- Replacing the silent blocks of the rear suspension beam
- Removing the rear suspension beam
- Replacing the hub bearing
- Car tail lift
Steering
- Design description
- Steering column removal
- Removing and disassembling the steering gear
- Removing the steering link and tips
Brake system
- Design description
- Bleeding the brakes
- Removing the brake master cylinder
- Removing the vacuum booster and brake pedal
- Replacing the front brake pads
- Removing front wheel brake parts
- Removing the front brake hose
- Replacing the rear brake pads
- Replacing the rear wheel cylinder
- Removing the rear brake hose
- Checking and adjusting the rear brake pressure regulator actuator
- Removing the rear brake pressure regulator
- Removing components and adjusting the parking brake system
Electrical equipment
- General information
- Battery
- Generator
- Starter
- Ignition switch
- Lighting and light alarm
- Steering column switch
- Sound signal
- Rear window defroster
- Windshield wiper and washer
- Engine cooling fan motor
- Testing devices
- Fog lights
- Headlight cleaners
- Power windows
- Door lock system
- Power trunk lock
Body
- Design description
- Removing the radiator grill
- Removing the hood
- Removing the gas-filled bonnet
- Removing the hood lock, crank and cable lock drive
- Removing the engine mudguard
- Removing the mudguard of the engine compartment
- Removing the front bumper
- Wheel arch liner removal
- Front wing removal
- Removing the rear bumper
- Removing the boot lid and hinges
- Removing the tailgate lock
- Removing the exterior rearview mirror
- Replacing an external door lock
- Removing the door trim
- Removing the door glass and power window mechanism
- Removing the door lock
- Removing the door
- Removing the lining and lining of the wind window
- Replacing glued body windows
- Removing the fuel filler flap
- Removing the inside rearview mirror
- Removing the sun visor
- Removing the ceiling handrail
- Removing the front seat belt
- Removing the front seat and slide
- Removing the rear seat and its mounting parts
- Removing the instrument panel and heater ducts
- Removing carpet and soundproofing material
- Removing the roof trim
- Removing the trunk lid
- Installing the towbar
Car care
- Car wash
- Preservation and protection of paintwork
- Glass care
- Wheel care
- Engine care
- Salon care
Heating and ventilation system
- Design description
- Removing the interior temperature sensor
- Removing the controller for the automatic heater control system
- Removing the recirculation switch
- Removing the air distribution housing for the heating and ventilation system
- Removing the recirculation flap control valve and electro-pneumatic valve
- Removing the heater motor
- Removing heater resistor
- Removing the micromotor for the heater damper
- Removing and disassembling the heater
Design features of cars VAZ-2111, -2112
- Rear door wiper and washer
- Removing the rear door trim VAZ-2111
- Removing the tailgate lock
- Removing the tailgate
- Removing the rear seat
- Removing the fog lights and reverse gear VAZ-2111
- Removing an additional brake light
- Removing the license plate light VAZ-2111
- Removing the rear window wiper motor gearbox
- Removing the direction indicator lamp, side light and brake light VAZ-2111
Features of cars with VAZ-21114 and -21124 engines (1.6 l)
- VAZ-21114 and VAZ-21124 engines
- Engine cooling system VAZ-21114 and VAZ-21124
- The power supply system of the VAZ-21114 and VAZ-21124 engines
- Engine management system VAZ-21114 and VAZ-21124
- The exhaust system of the exhaust gases of the VAZ-21114 and VAZ-21124 engines
- Electric equipment of cars with engines VAZ-21114 and VAZ-21124
- Car body with engines VAZ-21114 and VAZ-21124
- The heating and ventilation system of cars with engines VAZ-21114 and VAZ-21124
Applications
- A tool used in addition to the staffing
- Electrical schemes
- Checking electrical circuits
- Wiring diagram of the car (wiring diagrams) VAZ-2110
- Electrical circuit of a VAZ-21102 car with a fuel injection system (controller "January-4")
- Electrical scheme of a car with a body "sedan" (except for components and parts of the injection system)
- Electrical diagram of a station wagon (except for components and parts of the injection system)
- Connection diagram of the engine control system VAZ-2111 (controller M1.5.4)
- Connection diagram of the engine control system VAZ-2111, -2112 (controllers M1.5.4N, "January 5.1)
- Wiring diagram of the engine control system VAZ-2111 (controller MP7.0)
- Connection diagram of a VAZ-21114 engine management system with distributed fuel injection for Euro-2 toxicity standards (M7.9.7 controller)
- Connection diagram of a VAZ-21114 engine management system with distributed fuel injection for Euro-3 toxicity standards (M7.9.7 controller)
- Connection diagram of a VAZ-21124 engine management system with distributed fuel injection for Euro-2 toxicity standards (M7.9.7 controller)
- Connection diagram of a VAZ-21124 engine management system with distributed fuel injection for Euro-3 toxicity standards (M7.9.7 controller)
- Tightening torques for threaded connections
- Basic data for adjustments and control
- Applicable fuels, lubricants and operating fluids
- Lamps used in the car
- Lip seals (oil seals) and rolling bearings
Customers reviews
from Кремнев К. on 09/01/2019
Нужны были только электросхемы
from Коболев К. on 23/05/2019
Большое спасибо, очень удобно иметь книгу в электронном виде.
