Renault Logan / Sandero since 2009, repair e-manual (in Russian)
About the manual
Engine type: 8V / 16V
Engine capacity: 1.4 / 1.6
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine type: 8V / 16V
Engine capacity: 1.4 / 1.6
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Content
General information
- Technical description
- Vehicle specifications
- Vehicle data sheet
Equipment and controls
- Location of controls and appliances
- Car keys
- Doors, central locking, power windows
- ignition switch (lock)
- Automatic transmission selector lever
- Instrument cluster
- Adjusting the front seats and steering column
- Switches
- HVAC control unit
- Passenger airbag switch
- Gearshift paddles
- Headlight beam direction regulator
- Rearview mirrors
Safety precautions for maintenance and repair
Maintenance
- Location of the main components and assemblies of the car
- Checking the car
- Maintenance schedule
- Checking the condition of wheels and tires
- Checking the fluid level in the glass washer reservoir
- Replacing the windshield wiper blades and the tailgate wipers
- Checking the engine oil level 1.4-1.6 (8V)
- Changing the oil and engine oil filter 1.4-1.6 (8V)
- Replacing engine spark plugs 1.4-1.6 (8V)
- Replacing the replacement element of the engine air filter 1.4-1.6 (8V)
- Replacing the drive belt of auxiliary engine units 1.4-1.6 (8V)
- Checking the condition and replacing the timing belt 1.4-1.6 (8V)
- Checking the level and topping up engine coolant 1.4-1.6 (8V)
- Replacing engine coolant 1.4-1.6 (8V)
- Checking the engine oil level 1.6 (16V)
- Changing the engine oil and oil filter 1.6 (16V)
- Replacing 1.6 (16V) engine spark plugs
- Replacing the replacement element of the engine air filter 1.6 (16V)
- Replacing the drive belt for engine auxiliary units 1.6 (16V)
- Checking the condition and replacing the timing belt 1.6 (16V)
- Checking the level and adding coolant to the engine 1.6 (16V)
- Engine coolant replacement 1.6 (16V)
- Checking the level and adding oil to a manual gearbox
- Checking the fluid level in the reservoir of the hydraulic brake system
- Replacing the fluid in the hydraulic brake system
- Bleeding the hydraulic brake system
- Checking the fluid level in the power steering reservoir
- Checking and adjusting the clutch release drive
- Checking the condition of the brake system
- Checking the condition of the chassis and transmission
- Checking steering status
- Checking the condition of the exhaust system
- Engine and its systems
Diagnostics of malfunctions
- Engine and its systems
- Compression measurement
- Checking the starter starting circuit
- Checking the engine ignition coil 1.4-1.6 (8V) and its circuits
- Checking the ignition coils of the 1.6 engine (16V) and their circuits
- Checking high-voltage motor wires 1.4-1.6 (8V)
- Checking the engine control sensors
- Checking the crankshaft position sensor and its chains
- Checking the throttle position sensor and its engine circuits 1.4-1.6 (8V)
- Checking the throttle position sensor and its engine circuits 1.6 (16V)
- Checking the coolant temperature sensor and its circuits
- Checking the intake air temperature sensor and its circuits
- Injector testing
- Checking the pressure in the engine power system
- Transmission, chassis, steering and braking system
- Electrical equipment
Engine 1.4-1.6 (8V)
- Design description
- Replacing the cylinder head gasket
- Checking and adjusting the thermal clearances in the valve actuator
- Replacing the camshaft oil seal
- Exhaust manifold gasket replacement
- Replacing the front crankshaft oil seal
- Replacing the crankshaft rear oil seal
- Replacing low oil pressure switch sensor
- Crankcase gasket replacement
- Removing the oil pump
- Powertrain support replacement
- Removing and installing engine or powertrain
Engine management system 1.4 -1.6 (8V)
- Design description
- Removing the electronic control unit
- Removing the crankshaft position sensor
- Removing the coolant temperature sensor
- Removing the throttle position sensor
- Removing the knock sensor
- Removing the intake air temperature sensor
- Removing the absolute air pressure sensor
- Removing oxygen concentration sensors
- Removing the speed sensor
- Ignition coil removal
Engine power system 1.4-1.6 (8V)
- Design description
- Removing and disassembling the fuel module
- Removing the air filter
- Removing the fuel rail and injectors
- Removing the idle speed regulator
- Throttle Removal
- Removing the intake manifold, replacing the gaskets
- Removing the fuel tank
- Removing the adsorber of the vapor recovery system
- Replacing the throttle cable
Engine cooling system 1.4-1.6 (8V)
- Design description
- Removing and checking the thermostat
- Removing the radiator fan
- Removing the radiator
- Removing the coolant pump
- Removing the expansion tank
Engine exhaust system 1.4-1.6 (8V)
- Design description
- Exhaust system suspension pads replacement
- Removing the exhaust system
- Replacing exhaust system components
Engines (16V)
- Design description
- Replacing low oil pressure switch sensor
- Removing the fuel rail protection
- Removing the oil separator for the crankcase ventilation system
- Removing the exhaust manifold
- Removing camshafts, replacing hydraulic support for valve levers
- Replacing the front crankshaft oil seal
- Replacing the crankshaft rear oil seal
- Crankcase gasket replacement
- Removing the oil pump
- Powertrain support replacement
- Removing and installing engine or powertrain
Engine management system 1.6 (16V)
- Design description
- Removing the electronic control unit
- Removing the crankshaft position sensor
- Removing the coolant temperature sensor
- Removing the throttle position sensor
- Removing the knock sensor
- Removing the absolute air pressure sensor
- Removing the intake air temperature sensor
- Removing oxygen concentration sensors
- Removing the speed sensor
- Ignition coil removal
Engine power system 1.6 (16V)
- Design description
- Removing and disassembling the fuel module
- Removing the fuel rail and injectors
- Removing the air intake
- Throttle removal
- Removing the idle speed regulator
- Removing the air filter housing
- Removing the receiver, replacing gaskets
- Removing the fuel tank
- Removing the adsorber of the vapor recovery system
- Replacing the throttle cable
Engine cooling system 1.6 (16V)
- Design description
- Removing and checking the thermostat
- Removing the thermostat housing
- Removing the radiator fan
- Removing the radiator
- Removing the coolant pump
- Removing the expansion tank
1.6 (16V) engine exhaust system
- Design description
- Exhaust System Suspension Pads Replacement
- Removing the exhaust system
- Replacing exhaust system components
Grip
- Design description
- Clutch release cable replacement
- Removing clutch parts
- Bleeding the hydraulic clutch release drive on a sandero stepway
Manual gearbox
- Design description
- Replacing shift lever bushings
- Removing the gear lever
- Gearbox control link removal
- Replacing the right wheel drive gland
- Gearbox removal
Front wheel drive
- Design description
- Removing front wheel drives
- Replacing the mud cover of the right-hand drive inner hinge
- Replacing cover and bearing for left-hand drive inner hinge
- Replacing the mudguard cover of the outer wheel drive hinge
Front suspension
- Design description
- Removing the shock absorber strut and its disassembly
- Replacing anti-roll bar components
- Lever removal
- Replacing the ball joint
- Removing the subframe
- Front wheel bearing replacement
Rear suspension
- Design description
- Shock absorber removal
- Spring removal
- Replacing the silent block of the beam arm
- Removing the rear suspension beam
- Replacing the rear wheel bearing
Steering
- Design description
- Steering wheel removal
- Steering column removal
- Replacing the tie rod end
- Steering gear cover replacement
- Steering gear removal
- Removing the power steering pump
- Bleeding the power steering system
Brake system
- Design description
- Replacing the brake pads of the front wheels
- Replacing the front wheel brake piston protective cover
- Replacing the brake pads of the rear wheels
- Removing the brake master cylinder
- Removing the check valve of the vacuum brake booster
- Removing the brake servo
- Replacing the front wheel brake hose
- Replacing the front wheel brake disc
- Replacing the wheel cylinder of the rear wheel brake mechanism
- Replacing the brake hose of the rear wheel
- Replacing the parking brake cables
- Adjustment of the parking brake actuator
- Removing the front wheel speed sensor
- Removing the rear wheel speed sensor
- Removing the ABS unit
- Removing the pressure regulator in the brakes of the rear wheels, adjusting the drive
Electrical equipment
- Design description
- Removing relays and fuses
- Replacing immobilizer coil and ignition switch
- Removing the battery
- Removing the generator, replacing the voltage regulator and the rectifier unit on the 1.4-1.6 (8V) engine
- Removing the generator, replacing the voltage regulator and the rectifier unit on the 1.6 (16V) engine
- Removing and checking starter
- Dismantling the engine starter 1.4-1.6 (8V)
- Dismantling the engine starter 1.6 (16V)
- Replacing the bulbs in the headlamp of a Logan car
- Removing the headlight on a Logan car
- Replacing bulbs in the headlamp of Sandero and Sandero Stepway cars
- Removing the headlight on Sandero and Sandero Stepway vehicles
- Removing the actuator for headlight beam direction control
- Replacing the fog lamp
- Removing the fog lamp
- Removing the side direction indicator, replacing the lamp on a Logan
- Removing the side direction indicator, replacing the lamp on Sandero and Sandero Stepway vehicles
- Removing the reversing light switch
- Removing the taillight, replacing the lamps on a Logan car
- Removing the taillight, replacing the lamps on Sandero and Sandero Stepway vehicles
- Replacing the lamp in the optional brake light on a Logan
- Replacing the lamp in the additional brake signal, removing the signal on Sandero and Sandero Stepway cars
- Removing the license plate light, replacing the lamp
- Replacing the interior lamp, removing the lamp
- Removing the glove compartment light, replacing the lamp, replacing the switch
- Removing the trunk light, replacing the lamp on a Logan car
- Removing the trunk light, replacing the lamp on Sandero and Sandero Stepway cars
- Removing the steering column switches and the connector of the switches with a drum device spiral cable
- Beeping
- Removing the switches
- Removing the windshield wiper motor gearbox
- Removing the tailgate wiper on the Sandero and Sandero Stepway
- Removing the electric window washer pump
- Removing instrument cluster
- Removing the junction box
- Removing the airbag control unit
- Removing the driver’s airbag
Body
- Design Description
- Removing the powertrain protection
- Removing the front bumper mudguards
- Removing the mudguards of the engine compartment
- Removing mudguards and front wheel arch liners
- Removing the rear wheel arch liners
- Removing the hood lock and lock drive cable
- Removing the front bumper on a Logan
- Removing the front bumper on Sandero and Sandero Stepway cars
- Removing the rear bumper on a Logan car
- Removing the rear bumper on Sandero and Sandero Stepway cars
- Removing the front door trim
- Removing the exterior rearview mirror
- Removing the front door glass
- Removing the front door power window mechanism
- Removing the lock and the outer handle of the front door
- Removing the rear door trim on a Logan
- Removing the rear door trim on Sandero and Sandero Stepway
- Removing the rear door glass on a Logan
- Removing the rear door windows on Sandero and Sandero Stepway vehicles
- Removing the rear window regulator
- Removing the lock and the outer handle of the rear door
- Removing the tailgate lock on a Logan
- Removing the tailgate on Sandero and Sandero Stepway
- Removing the floor tunnel lining
- Removing the dashboard
Heating, ventilation and air conditioning system
- Design Description
- Removing the heating, ventilation and air conditioning control unit
- Heater fan removal
- Removing additional heater fan resistor
- Removing the heater radiator
- Removing air conditioning compressor
Applications
- Repair tools
- Tightening torques for critical threaded connections
- Applicable fuels, lubricants and operating fluids
- Lamps used in the car
Write a review
Customers reviews
Приемлемые цены.