Наши книги можно приобрести по карточкам єПідтримка!

Content

Instruction manual

  • Introduction
  • Instrument panel
  • Climate control system
  • Lighting equipment
  • Controls
  • Locks and security
  • Seats and auxiliary restraints
  • Driving

Introduction

Regular care and maintenance

  • Service schedule
  • Introduction
  • General recommendations for car care
  • Checking the levels of fluids and lubricants
  • Check of a condition and pressure of inflation of tires
  • Replacement of engine oil and oil filter
  • Rearrangement of wheels
  • Inspection and replacement of wiper blades
  • Inspection, maintenance and charging of the battery
  • Inspection of the cooling system
  • Seat belt inspection
  • Inspection and replacement of hoses that are in the engine compartment
  • Checking the technical condition of the braking system
  • Checking the technical condition of the steering and suspension
  • Checking the technical condition of the fuel system
  • Checking the condition and replacing the air filter
  • Checking the level of the transmission fluid in the manual transmission
  • Checking the level of the transmission fluid in the transfer case
  • Inspection of drive shaft covers
  • Inspection of the technical condition of the exhaust system
  • Replacing the fuel filter
  • Maintenance of the cooling system (draining, flushing and filling)
  • Brake fluid replacement
  • Checking the condition and replacing the drive belt
  • Changing the oil of a manual gearbox
  • Checking the level and replacing the differential oil
  • Checking the level of the transmission fluid in the manual transmission
  • Checking the condition and replacing the valve of the crankcase ventilation system (PCV)
  • Inspection and replacement of spark plugs
  • Check of a condition of the coil of ignition (engines V8)
  • Inspection and replacement of wires of spark plugs (V6 engines)

The V6 engine

  • General information
  • Car repair without removing the engine from the engine compartment
  • The top dead center (TDC) of the piston of the first cylinder is the location
  • Valve mechanism covers - removing and installing
  • Rocker arms and compensators - removal, inspection and installation
  • Intake manifold - removal and installation
  • Exhaust manifolds - removal and installation
  • Cylinder heads - removing and installing
  • Pulley and front crankshaft seal - removal and installation
  • Drive chain and sprockets - removal, inspection and installation
  • Camshafts - removal, inspection and installation
  • Pallet - removal and installation
  • Oil pump - removal and installation
  • Handwheel / drive plate - removal and installation
  • Rear main engine oil seal - replacement
  • Engine mountings - inspection and replacement

The V8 engine

  • General information
  • Car repair without removing the engine from the engine compartment
  • The top dead center (TDC) of the piston of the first cylinder is the location
  • Valve mechanism covers - removing and installing
  • Intake manifold - removal and installation
  • Exhaust manifolds - removal and installation
  • Pulley and front crankshaft seal - removal and installation
  • Drive chain casing - removing and installing
  • Drive chains, tensioners and asterisks - removal, inspection and installation
  • Rocker arms and valve clearance adjusters - removal, inspection and installation
  • Camshafts - removal, inspection and installation
  • Cylinder heads - removing and installing
  • Pallet - removal and installation
  • Oil pump - removal and installation
  • Drive disk - removal and installation
  • Rear main engine oil seal - replacement
  • Engine mountings - inspection and replacement

Major engine repairs

  • General information - overhauling the engine
  • Checking the oil pressure
  • Compression check in cylinders
  • Diagnosis with measurement of the degree of dilution
  • Alternative methods of engine restoration
  • Engine removal - methods and precautions
  • Engine - removal and installation
  • Engine overhauling - sequence of disassembly
  • Intermediate and balancing shaft (V6) - removal, inspection and installation
  • Pistons and connecting rods - removal and installation
  • Crankshaft - removal and installation
  • Engine overhaul - assembly sequence
  • The first start-up and engine break-in after major overhaul

Cooling, heating and air conditioning systems

  • General information
  • Antifreeze - general information
  • Thermostat - check of working capacity and replacement
  • Cooling fan - performance check and replacement
  • The expansion tank of the system - removal and installation
  • Radiator - removal and installation
  • Cooling pump - performance test
  • Pump of cooling system - replacement
  • Coolant temperature sensor - operation and replacement test
  • Resistor and fan heater - replacement
  • Control panel for heating / air conditioning - removal and installation
  • Heater - replacement
  • Air conditioning and heating systems - operation and maintenance check
  • Air conditioning compressor - removal and installation
  • Air conditioning system accumulator - removal and installation
  • Condenser for air conditioning - removal and installation
  • Compressor clutch loop switch and high pressure cutoff switch - replacement
  • Air conditioning expansion tube - removing and installing

Fuel and exhaust system

  • General information
  • Pressure relief in the fuel system
  • Fuel pump / fuel pressure check
  • Fuel lines and their connectors - general information
  • Fuel tank - removal and installation
  • Fuel tank - cleaning and recovery
  • Fuel pump / fuel level sensor - removing and installing
  • Intake air duct and air cleaner - removal and installation
  • Accelerator cable - removal and installation
  • Multipoint fuel injection (MFI) - general information
  • Fuel injection system - general condition check
  • Throttle unit - inspection, removal and installation
  • Fuel system by-pass valve - removal and installation
  • Extinguisher of fuel pulsation - removal and installation
  • Fuel receiver and nozzles - removal and installation
  • Maintenance of the exhaust system - general information

Engine electrical systems

  • General information, precautions and battery disconnection
  • Battery - emergency start from external battery
  • Battery - inspection and replacement
  • Battery wires - inspection and replacement
  • Ignition system - general information and precautions
  • Ignition system - operation check
  • Ignition coils - replacement
  • Charging system - general information and precautions
  • Charging system - operation check
  • Generator - removal and installation
  • Launch system - general information and precautions
  • The starter and its electrical circuit - check without removal
  • Starter - removal and installation

Exhaust gas control and engine control systems

  • General information
  • On-board diagnostic system (OBD) and DTCs
  • The brake pedal position sensor (RRP) is a replacement
  • The camshaft position sensor (CMP) is a replacement
  • Crankshaft position sensor (TFR) - replacement
  • Cylinder Head Temperature Sensor (VT) (V8) - replacement
  • Selector position sensor (DTR) - replacement and adjustment
  • Coolant temperature sensor (ECT) (V6) - replacement
  • Supply air temperature sensor (IAT) - replacement
  • The sensor of the intermediate shaft revolution (ISS) is a replacement
  • Detonation sensor - replacement
  • Airflow meter (MAF) - replacement
  • The sensor of rotation of the secondary shaft (OSS) - replacement
  • Oxygen sensors - general information and replacement
  • Throttle Position (TP) Sensor - replacement
  • Turbine shaft speed sensor (TSS) - replacement
  • Engine control unit (PCM) - removal and setting
  • Idle valve (IAC) - replacement
  • Catalytic converters - general information, inspection and replacement
  • Fuel vapor recovery system (EVAP) - general description and replacement of elements
  • The EGR system is a general description and replacement of elements
  • Crankcase ventilation system (PCV)

Manual transmission

  • General information
  • Gear lever - removal and installation
  • The stuffing box located in the shell extension is a replacement
  • Transmission support - inspection and replacement
  • Manual gearbox - removing and installing
  • Mechanical transmission repair - general information

Automatic transmission

  • General information
  • Diagnosis - general information
  • Selector lever - replacement
  • Selector cable - replacement and adjustment
  • Switching mechanism switch cable - replacement and adjustment
  • Transmission control switch - inspection and replacement
  • Transmission oil cooler - removing and installing
  • Automatic gearbox - removal and installation
  • Automatic transmission repair - general information

Transfer case

  • General information
  • Transfer case control box (A4WD) - replacement
  • Switching servo motor (A4WD) - replacement
  • Drive shaft oil seal for transfer case - removing and installing
  • Mode switch (A4WD) - replacement
  • Transfer case - removal and installation

Clutch and transmission

  • General information
  • Clutch - description and verification
  • Clutch master cylinder - removal and installation
  • Clutch slave cylinder - removing and installing
  • Hydraulic clutch system - pumping
  • Releaser - removal and installation
  • Clutch elements - removal, inspection and installation
  • Drive shafts - removal and installation
  • Drive shaft cover - replacement
  • Drive shaft - removal and installation
  • Omentums of the differential - replacement
  • Differential - removal and installation
  • Cardan joints - general description and inspection
  • Cardan joints - replacement

Brake system

  • General information
  • Anti-lock braking system (ABS) - general information
  • Disc brake pads - replacement
  • Disc brake caliper - removal and installation
  • Brake disc - inspection, removal and installation
  • Brake shoes - replacement
  • Master cylinder - removal and installation
  • Hoses and pipes of brake system - inspection and replacement
  • Hydraulic braking system - pumping
  • Vacuum brake booster - performance check, removal and installation
  • Handbrake cable - Removing and installing
  • Stop light sensor - replacement

Suspension and steering

  • General Information
  • Shock absorber / spring (front suspension) - removing, replacing parts and installing
  • Stabilizer of lateral stability (front) and its bushings - removal and installation
  • Rotary cam (front) - removal and installation
  • The top lever of a forward suspension bracket - removal and installation
  • The lower lever of a forward suspension bracket - removal and installation
  • Front hub and bearing - removal and installation
  • Shock absorber / spring (rear suspension) - removal, replacement of parts and installation
  • Stabilizer of lateral stability (rear) and its bushings - removal and installation
  • The top lever of a back suspension bracket - removal and installation
  • The bottom lever of a back suspension bracket - removal and installation
  • Lateral pull - removal and installation
  • Rear wheel trunnion - removal and installation
  • Rear hub and bearing - replacement
  • Suspension hinges - inspection and replacement
  • Steering wheel - removal and installation
  • Steering column - removal and installation
  • Tips of steering rods - removal and installation
  • Power steering pads - replacement
  • Steering gear - removal and installation
  • Power steering pump - removal and installation
  • Hydraulic power steering system - pumping
  • Hydraulic power steering fluid cooler - removal and installation
  • Wheels and tires - general information
  • Wheel alignment angles - general information

Car body

  • General information
  • Body - service
  • Vinyl cladding - maintenance
  • Upholstery and carpets - maintenance
  • Body repair - minor damage
  • Body repair - serious damage
  • Loops and locks - maintenance
  • Wind and fixed glass - replacement
  • Hood and tailgate support hinges - removal and installation
  • Hood cover - removal, installation and adjustment
  • Latch and bonnet bonnet cable - removal and installation
  • Radiator grille and bonnet panel - removal and installation
  • Bumpers - removal and installation
  • Front wing - removal and installation
  • Facing panels of doors - removal and installation
  • Door - removal, installation and adjustment
  • Latch, lock cylinder and door handles - removal and installation
  • Glasses of door windows - removal and installation
  • Lift - removal and installation
  • Mirrors - removal and installation
  • Rear hinged door - removal, installation and adjustment
  • The lock of the rear hinged door - removal and installation
  • Central console - removal and installation
  • Dashboard panel trim - removal and installation
  • Dashboard paneling - removal and installation
  • Covers of a casing of a steering column - removal and installation
  • Air intake housing - removal and installation
  • Seats - removal and installation
  • Instrument panel - removal and installation

Electrical equipment of a car

  • General information
  • Determining the causes of faults in electrical circuits - general information
  • Fuses and inserts - general information
  • Circuit breakers - general information
  • Relay - general information and validation
  • Circuit breaker / warning light interrupter - operation and replacement test
  • Switches located on the steering column-change
  • Switch and ignition lock cylinder - replacement
  • Switches located on the dashboard - replacement
  • Instrument panel - removal and installation
  • Windscreen wiper motor - replacement
  • Car radio and speakers - removing and installing
  • Antenna and its cable replacement
  • Rear window heater - performance check and repair
  • Headlamp bulbs - replacement
  • Headlights - adjustment
  • Headlights - replacement
  • Signal replacement
  • Replacement of lighting fixtures
  • Side mirrors with electric drive - description
  • Speed-keeping system - description
  • Power windows - description
  • Automatic door locks - description
  • Daylight-saving lighting (DRL) - general information
  • Airbag system - general information
  • Wiring diagrams
Only original manuals
Available immediately after payment
Full compliance with the paper edition
100% protection of your payments
(9)

Description of the procedure for oil and oil filter replacement in engine 4,6 l (for use on the Ford Explorer III model)

Typically, users of our site find this page for the following queries:
oil level Ford Explorer, oil change Ford Explorer, oil pressure Ford Explorer, oil for how to check the oil level Ford Explorer, oil level Mercury Mountaineer, oil change Mercury Mountaineer, oil pressure Mercury Mountaineer, oil for how to check the oil level Mercury Mountaineer

Sorry, the article is only available in Russian.

To read the article, you need to change the language on the site.