VW Polo Sedan since 2010, repair e-manual (in Russian)
About the manual
Engine type: gasoline
Engine capacity: 1.4 / 1.6 liters.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine type: gasoline
Engine capacity: 1.4 / 1.6 liters.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Content
General information
- Technical description
- Specifications of VW Polo Sedan
- Vehicle data sheet
Equipment and controls
- Location of controls and appliances
- Doors, boot lid, central locking, power windows
- Seat and steering wheel adjustment
- Ignition switch (lock)
- Instrument cluster
- Gearbox Control
- Outdoor light switch and headlight beam direction control
- Gearshift paddles
- The switch panel on the dashboard
- Heating, ventilation and air conditioning control unit
- Rearview mirrors
- Interior light
Safety precautions for maintenance and repair
VW Polo sedan maintenance
- Location of the main components and assemblies of the car
- Checking the car
- Maintenance schedule
- Checking the condition of wheels and tires
- Replacing the windshield wiper blades
- Checking the fluid level in the windshield washer reservoir
- Checking engine oil level
- Changing engine oil and oil filter
- Checking the level and adding coolant
- Removing the ignition coils, replacing the spark plugs
- Replacing the air filter element
- Checking and replacing the auxiliary drive belt
- Replacing the fuel filter
- Checking the condition of the exhaust system
- Checking the level and adding oil to a manual gearbox
- Checking the level and adding fluid to the automatic transmission
- Checking the fluid level in the reservoir tank for hydraulic brakes and clutch
- Replacing fluid in brake and clutch actuators
- Checking the battery 38 adjusting the direction of the headlight beams
- Replacing the filter for the HVAC system
- Checking the condition of the chassis and transmission
- Checking steering status
- Checking the condition of the brake system
Diagnostics of malfunctions
- Engine and its systems
- Transmission, chassis, steering and braking system
- Electrical equipment
- Car repair
Engine
- Design description
- Compression measurement
- Removing the low oil pressure switch sensor
- Removing the crankcase ventilation system
- Powertrain support replacement
Engine management system
- Design description
- Removing the electronic control unit
- Removing the crankshaft position sensor
- Removing the camshaft position sensor
- Removing the absolute pressure sensor and the intake air temperature
- Removing the coolant temperature sensor
- Removing the gas pedal module
- Removing the knock sensor
- Removing oxygen concentration sensors
- Removing the clutch pedal position sensor
Power system
- Design description
- Removing the fuel module, replacing the strainer
- Removing the fuel rail and injectors
- Removing the air filter
- Throttle removal
- Intake manifold removal
- Checking the fuel pressure in the power system and injectors
- Removing the fuel tank
- Removing the purge valve adsorber
- Removing the adsorber of the vapor recovery system
Cooling system
- Design description
- draining and filling coolant
- Checking and replacing thermostats
- Removing the radiator fan
- Replacing the fan motor
- Removing the radiator
- Removing the coolant distributor
- Removing the coolant pump
- Removing the fan control unit
Exhaust system
- Design description
- Exhaust system suspension pads replacement
- Replacing the main silencer
- Replacing an optional silencer with metal compensator
- Collector removal
Grip
- Design description
- Bleeding clutch hydraulic
- Replacing the clutch pressure and driven discs
- Removing the bearing and clutch lever
- Removing the hydraulic master cylinder and clutch pedal
- Removing the clutch slave cylinder
- Replacing the clutch hose and pipe
Gearbox
- Design description
- Removing cables and gearbox control mechanism
- Replacing the oil seal on the front wheel drive flange
- Gearbox removal
Front wheel drive
- Design description
- Removing front wheel drives
- Removing the outer joint, replacing the dirt cover
- Removing the inner joint
Front suspension
- Design description
- Removing the anti-roll bar
- Replacing the anti-roll bar pillows, removing the bar
- Removing the shock absorber strut and its disassembly
- Replacing the ball joint
- Lever removal
- Replacing the front wheel hub assembly
- Removing the subframe
Rear suspension
- Design description
- Shock absorber removal
- Spring removal
- Removing the rear suspension beam
- Replacing the silent blocks of the arms of the rear suspension beam
Steering
- Design description
- Steering wheel removal
- Removing the intermediate shaft
- Steering column removal
- Replacing the tie rod end
- Steering gear cover replacement
- Steering link removal
- Steering gear removal
Brake system
- Design description
- Bleeding the hydraulic brake system
- Replacing the brake pads of the front wheels
- Replacing the brake pads of the rear wheels
- Removing front wheel brake components
- Replacing the wheel cylinder of the rear wheel brake mechanism
- Removing the brake master cylinder
- Removing the check valve of the vacuum brake booster
- Removing the brake servo
- Replacing the front wheel brake hose
- Replacing the brake hose of the rear wheel
- Removing wheel speed sensors
- Removing the parking brake components
Electrical equipment
- Design description
- Replacing fuses and relays
- Removing the battery
- Replacing the cylinder mechanism and the contact group of the ignition switch
- Removing the generator
- Replacing brush holder with voltage regulator
- Generator test
- Removing and checking starter
- disassembly of the starter
- Replacing the lamps in the headlamp
- Removing the headlamp
- Replacing the fog lamp, removing the fog lamp
- Removing the side direction indicator, replacing the lamp
- Removing the taillight, replacing the lamps
- Replacing the optional brake signal
- Removing the license plate light, replacing the lamp
- Replacing bulbs for interior lighting, removing the lamp
- Removing the trunk light, replacing the lamp
- Beeping
- Removing the anti-theft control unit and motion sensors
- Removing the drum unit of the spiral cable and steering column switches
- disassembling the outside rearview mirror
- Removing the windshield wiper
- Removing the pump and windshield washer fluid reservoir
- Removing switches and headlight beam adjuster
- Removing instrument cluster
- Replacing the outdoor temperature sensor
- Removing the head unit of the sound reproduction system
- Removing the driver’s airbag
- Removing the reversing light switch
- Removing the brake light switch
Body
- Design description
- Removing the mudguard of the engine compartment
- Front wheel lockers
- Removing the rear wheel arch liners
- Removing the radiator lining
- Removing the battery pad
- Removing the front bumper
- Removing the rear bumper
- Removing the front door trim
- Removing the exterior rearview mirror
- Removing the front door glass
- Removing the power window front door
- Removing the outer handle of the front door and cylinder lock mechanism
- Removing the front door lock
- Removing the rear door trim
- Removing the rear door glass
- Removing the rear power window
- Removing the inner handle of the rear door
- Removing the outer rear door handle
- Removing the rear door lock
- Removing the trunk lid trim
- Removing the floor tunnel lining
- Removing the glove box
- Removing the dashboard
Heating, ventilation and air conditioning system
- Design description
- Removing the heating, ventilation and air conditioning control unit
- Heater fan removal
- Removing additional heater fan resistor
- Removing air conditioning compressor
- Removing the air conditioner condenser
- Replacing the refrigerant pressure sensor
Applications
- Repair tools
- Tightening torques for critical threaded connections
- Applicable fuels, lubricants and operating fluids
- Lamps used in the car
Wiring diagrams VW Polo Sedan