Maxus since engine of 2.5D liter, repair e-manual (in Russian)
About the manual
Engine types: VM
Engine capacity: 2.5D l.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine types: VM
Engine capacity: 2.5D l.
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Contents
Operating instructions
- Before driving
- Keys
- Locking / unlocking doors
- Central door locking system
- Unlocking and locking doors
- Alarm system (if installed)
- Side sliding door (s)
- Rear doors
- Cab windows
- Seats
- Seat belts
- Seat belt care
- Airbags
- Controls and dashboard
- Sound signaling
- Dashboard switches
- Steering column switches
- Lever, turn signal and headlamp switch
- Sound signal
- Heating and ventilation
- Climate control (if available)
- Mirrors
- Interior lighting
- Cigarette lighter
- Ashtray
- Storage space
- Sun visors
- Starting the engine and driving the vehicle
- Car preparation
- Ignition / steering column lock
- Immobilizer
- Engine start / stop
- Car break-in
- Catalytic converter
- Parking brake
- Gear shifting
- Power steering
- Brakes
- Anti-lock braking system (ABS) (if equipped)
- Tires
- Fuel
- Crossing obstacles
- Cargo transportation
- Towing a trailer
- Vehicle Maintenance
- General car care
- Safety measures
- Required checks
- Weekly checks (or before long trip)
- Opening / closing the hood
- Engine cooling system
- Brakes
- Clutch
- Power steering
- Washer fluid reservoir
- Washer nozzles
- Wiper Blades
- Battery Precautions
- Tires
- Seat belts
- Body care
- Practical advice
- Wheel replacement
- Spare wheel
- Vehicle towing
- Draining water from the fuel filter
- Bleeding the fuel system
- Removal and installation of the storage battery (accumulator)
- Starting the engine from the battery of another car
- Fuses and relays
- Main fuse box
- Replacing fuses
- Replacing lamps
- Identification numbers
- Specifications
- Operating materials
- Headlight range control switch positions
- Wheels and tires
- Overall dimensions of the car
Diesel engine VM 2.5
- Links
- General precautions
- Operations to repair the engine without removing it from the car
- Abbreviations and acronyms
- Technical data
- Special tools
- Tightening torques in Nm
- Front accessory drive belt (FEAD) - (external drive belt)
- Removal / Installation
- Timing belt - access
- Removal / installation
- Withdrawal
- Checking
- Reinstall
- Timing belt - replacement
- Replacing the belt
- Timing gear housing - removal / reinstallation
- Timing gear housing - removing
- Removing / reinstalling
- Removing the front crankshaft oil seal
- Reinstalling the front crankshaft cover
- Crankcase
- Reinstall
- Camshaft oil seal - replacement
- Withdrawal
- Checking
- Installation
- Camshaft support - remove / reinstall
- Withdrawal
- Checkout
- Reinstall
- Camshafts
- Removing / reinstalling
- Withdrawal
- Checking
- Reinstall
- Cylinder head
- Removal, repair, re-installation
- Withdrawal
- Checking
- Cylinder head - repair
- Reinstalling the cylinder head
- Flywheel
- Flywheel - removal / installation
- Withdrawal
- Reinstall
- Rear crankshaft oil seal - replacement
- Withdrawal
- Installation
- Crankshaft
- Front crankshaft oil seal - replace
- Crankshaft repair
- Disassembly
- Checking
- Cylinder block
- Liner replacement
- Crankshaft and bearings
- Main bearing shell identification
- Front main bearing - replacement
- Rear main bearing - thrust washers
- Pistons and connecting rods
- Rods
- Pistons
- Rebuild
- Fuel System
- Safety
- Warnings
- Description of the system operation
- Bleeding the fuel system
- Fuel filter - removal / installation
- Injectors - removal / installation
- Checking
- Installing a nozzle
- Fuel pump - removal / installation
- Withdrawal
- Installation
- Lubrication system
- Oil circulation
- Oil filter - change
- Pressure reducing valve - removal / installation
- Oil pump - removal / installation
- Withdrawal
- Checking
- Installing the oil pump
- Cooling system
- Cooling system operation
- Thermostat - removal and installation
- Water pump - removal and installation
- Withdrawal
- Vacuum system
- Description
- Test procedure
- Possible system malfunctions
- Vacuum pump - removal and installation
- Withdrawal
- Checking
- Installing the vacuum pump
Transmission
- Technical data
- Gearbox with transmission
- Gear ratios
- Clearances and Tolerances
- Maintenance
- Special tools
- Tightening torques for threaded connections in NM
- Driving axle shafts Removal and installation
- Corrugated Covers of Universal Joints of Constant Velocity
- Replacement
- Disconnecting the CV joint
- Checking the CV joint
- Reinstall
- Constant Velocity Joints
- Repair
- Removal / disassembly
- Build
- Tripod joints and bellows
- Replacement
- Support bearing of the right axle shaft
- Replacement
- Axle oil seals
- Replacement
- Gear shifting mechanism
- Selector cable - change
- Withdrawal
- Reinstall
- Adjusting the cables
- Adjustment
- Transmission in the block by transmission
- Removal and installation
- Withdrawal
- Checking
- Reinstall
- Clutch - Removal / Installation
- Withdrawal
- Checking
- Reinstall
- Gearbox repair
- Withdrawal
- Transmission components in the transmission block
- Component check
- Clutch housing
- Transmission housing in the transmission block
- Input and output shafts
- Gears, bearings and bushings
- Synchronizers
- First / Second Gear Synchronizer
- Synchronizers for third / fourth gear and fifth / reverse gear
- Synchronizer Locking Rings
- Program Voters
- Reverse idler gear
- Fifth / reverse gear lock
- Gear Shift Components
- Reverse Gear Lever
- Gear Lever
- Transmission assembly
- Final drive repair
- Removal / disassembly
- Checking the main gear
- Check
- Build
Suspension, steering and braking system
- Specifications
- Front Springs Identification
- Maintenance
- Special tools
- Tightening torques of connections in NM
- Front pillar
- Withdrawal
- Repair
- Installation
- Control lever
- Withdrawal
- Shock absorbers
- Removal / Installation
- Rear shock absorbers
- Rear springs
- Removal / Installation
- Checking
- Installation
- Front anti-roll bar
- Removal / installation
- Checking
- Installation
- Technical data
- Maintenance
- Special tools
- Tightening torques of connections in NM
- Power steering hydraulic air fill / bleed
- Removal / installation
- Adjusting the steering rods
- Steering knuckle ball
- Withdrawal
- Installation
- Steering fist
- Withdrawal
- Repair
- Installation
- Corrugated steering rack covers
- Replacement
- Checking
- Installation
- Steering unit - removal and installation
- Withdrawal
- Installation
- Steering wheel - removal and installation
- Withdrawal
- Installation
- Steering column - removal and installation
- Withdrawal
- Installation
- Column connecting shaft
- Removal / installation
- Technical data
- Special tools
- Front wheel hubs - repair
- Dismantling
- Checking
- Rebuild
- Rear wheel hubs - adjustment
- Rear wheel hubs - removal / repair / installation
- Withdrawal
- Repair
- Installation
- Technical data
- Clearances and tolerances
- Maintenance
- Preventive maintenance
- Tightening torques in Nm
- Braking system operation (without ABS)
- General information
- Front brakes
- Bleeding the brakes
- Cars without ABS
- Brake linings
- Replacement
- Checking
- Installation
- Brake caliper
- Withdrawal
- Removing the staple
- Checking
- Installation
- Brake disc
- Withdrawal
- Checking
- Installation
- Rear brake pads
- Withdrawal
- Checking
- Installation
- Rear wheel brake cylinder
- Removal and installation
- Brake master cylinder - removal and installation
- Withdrawal
- Installation
- Handbrake-adjustment
Body, cab, air conditioner
- General precautions
- Precautions for supplemental restraint system (SRS)
- Repair and replacement
- Maintenance of the body and painted surfaces
- Underbody preservation
- Seats and interior trim
- Seat belts
- Door seals
- Glass
- Wiper blades
- Maintenance
- Tightening torques for threaded connections in NM
- Radiator grill
- Closing hood panel
- Removal and installation
- Bumpers
- Front bumper
- Removal and installation
- Rear bumper
- Headlights
- Cab doors
- Cab lining - removal and installation
- Door lock and lever mechanism
- Window regulator
- Door glass - removal / installation
- Withdrawal
- Reinstall
- Cab door - removal and installation
- Door hinge adjustment
- Side loading door
- Blocking mechanism
- Cable adjustment - extra high roof car door, rear upper latch
- Rear doors
- Adjusting the cover plate
- Seats - removal and installation
- Driver's seat - removal
- Seat installation
- Seat belts - removal and installation
- Driver's seat belt
- Withdrawal
- Driver's seat belt with pretensioner
- Reinstall
- Passenger seat belt
- Car headliner
- Removing / reinstalling
- Reinstall
- Exterior mirrors
- Removing the mirror glass
- Glass refitting
- Heater cable adjusters
- Steering column switches
- Withdrawal
- Panel trim
- Removing center panels
- Glove box
- Removal and installation
- Heating and ventilation
- Heater block - removal and installation (right hand drive)
- Withdrawal
- Reinstall
- Fan motor speed resistor - removal and installation
- Withdrawal
- Reinstall
- Wiper mechanism - removal and installation
- Withdrawal
- Reinstall
- Aligning wiper arms and blades
- Supplemental restraint system (SRS)
- Description
- Components of the secondary passive safety system
- Components of the primary (main) passive safety system
- Airbags
- Description
- Driver side airbag
- Removing the airbag module
- Reinstall
- Removing / reinstalling passenger airbag
- Withdrawal
- Reinstall
- Driver's seat belt tensioner
- Description
- Removing / reinstalling the pre-tensioner
- Steering wheel clock spring
- Location
- Description
- Removing and installing clock spring
- Electronic control unit for additional passive safety devices (ECU)
- Description
- Crash and safety sensors
- Removing / reinstalling the electronic control unit (ECU) of the supplementary restraint system (SRS)
- Withdrawal
- Installation
- Auxiliary restraint system (SRS) warning light
- Location
- Operation (no faults)
- Work in case of system malfunction
- Additional passive restraint system (SRS) wiring
- Description
- Safety, handling, storage and transportation
- Disposal of SRS components
- Air conditioning
- General Precautions
- Expansion tank / water separator
- Technical data
- Components
- Maintenance
- Tightening torques of connections in NM
- Principles of refrigeration
- Cooling (evaporation / expansion)
- Refrigerant
- Cooling cycle
- Air conditioning system MAXUS
- Description / operation
- Compressor
- Condenser
- Expansion tank / water separator
- Triple switch
- Expansion valve
- Evaporator
- Air conditioning control
- Air conditioning switch
- Maximum cooling
- Normal cooling
- Double level
- Ventilation
- Maximum heating
- Normal heating
- Misting / freezing
- Air conditioning system - operating tips
- Charging and draining refrigerant
- Removal and installation procedures
- Condenser - removal and installation
- Expansion tank / water separator - removal and installation
- Compressor - removal and installation
- Expansion valve (TXV) - removal and installation
- Triple switch - remove and reinstall
- Evaporator - removal and installation
- Refrigerant pipes - removal and installation
- Refrigerant pipe from compressor to condenser, removal and installation
- Refrigerant pipe from condenser to expansion tank / moisture separator, removal and installation
- Air conditioner wiring diagram
- Diagnostics
- Air conditioning requirements
- Air conditioning fuses
- Grounding air conditioning components
- Checking the functioning of the air conditioner switch, heater blower switch and wiring
- Troubleshooting
- Status
- Observation
- Result
- Checking the functioning of the A / C compressor clutch and wiring
- Status
- Observation
- Result
- Test A / C compressor relay and control circuit wiring
- Status
- Observation
- Result
- 32.102 Radiator and air conditioning fans 2,5 CRD double fan 2005
- 74.101 Heating / ventilation / air conditioning cargo van / combi 2005
Electrical equipment
- General security measures
- Devices for work
- Repairs and replacements
- How to use the guide
- Description of electrical diagrams
- Wire harness routing
- Wiring
- Car wiring
- Descriptions of electrical circuits
- Wire and connection color codes
- Basic characters
- Signal lamps and indicators
- Model / types
- Circuit numbering
- Designation of electrical circuits
- Cable color codes (additional information)
- Basic characters
- Diode
- Fuse
- Cable connection
- Plug (holder)
- Rhombus (solid line)
- Rhombus (dotted line)
- Special cables
- Shielded or coaxial cable
- Twisted cable
- Connectors
- Wire Harness Connectors
- Component connectors
- Special connectors (jumpers)
- Switch and relay positions
- Model / type (additional information)
- Dealer / accessory diagrams
- Cable harness (right-hand drive vehicles)
- Relay markings and locations
- Relays located in the main fuse box behind the dash
- Relays located in the under-hood auxiliary fuse box
- Relays located in the box with the relay for the cooling fan under the hood
- SRS additional safety device control unit
- Door release system and alarm module
- ETACS control unit
- VSS coupler
- Incandescent coil controller
- Grounding points ("mass")
- Engine ECM (electronic control unit)
- Component / connector index
- Main fuse box
- Relay
- Auxiliary fuse box
- Location of fuses and relays
- Connector reference
- Table of correspondence of electrical diagrams to circuits
- Wiring diagrams
- 10.101 Etacs control unit, cargo van / combi
- 15.101 Ignition key, cargo van / combi
- 16.101 Engine management / immobilizer, engine 2.5 CRD
- 17.101 Diagnostic system, cargo van / combi
- 30.101 Accumulator battery, starter, alternator, cargo van / combi
- 31.101 Grounding (earth connection), cargo van / combi
- 31.101 Grounding points ("weights"), cargo van / combi
- 32.101 Radiator fan, 2.5 CRD engine, single fan
- 32.102 Radiator and air conditioning fans, 2.5 CRD engine, double fan
- 34.101 Window regulator / adjustment of mirrors, cargo van / combi
- 44.101 ABS (Anti-lock braking system), cargo van / combi (option)
- 49.101 Direction indicators and hazard warning lights, van / combi
- 53.101 Windscreen wiper and washer, cargo van / combi
- 54.101 Brake and reversing lamps, cargo van / combi
- 55.101 Fog lights - front and rear, cargo van / combi
- 56.101 Headlamps (load-dependent headlamp directional control), cargo van / combi
- 57.101 Side lights, rear lights, license plate lights, combi van
- 58.101 Dashboard lighting, van / combi
- 60.101 Interior lamps, cargo van
- 60.103 Interior lamps, combi
- 61.101 Instrument panel lamps and warning lamps, cargo van / combi
- 71.101 Horn, additional passive safety system, van / combi
- 72.101 Cigarette lighter / heated mirrors / heated rear window, cargo van / combi
- 74.101 Heating / ventilation / air conditioning, cargo van / combi
- 75.101 Audio equipment, cargo van / combi
- 77.101 Central locking / burglar alarm, cargo van / combi