Hyundai Getz since 2002, repair e-manual (in Russian)
About the manual
Engine types: G4EA / G4ED
Engine capacity: 1.3 / 1.6 liters
Power: 82 / 105hp
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine types: G4EA / G4ED
Engine capacity: 1.3 / 1.6 liters
Power: 82 / 105hp
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Content
Background
- Car specs
- Passport details of the car
- Maintenance and repair safety
Safety and maintenance
Operation and maintenance
- Equipment and controls
- Car keys
- Front and rear doors
- Tailgate (luggage compartment)
- Central castle
- Ignition switch (lock)
- Starting the engine
- Fuel supply emergency switch
- Location of controls and appliances
- Instrument combination
- Hood
- Fuel tank fill tube
- Gearbox (manual transmission)
- Gear selector (automatic transmission)
- Parking brake lever
- Steering column and sound
- Central light switch
- Headlight light switch
- Turn signal switcher
- Switch for windshield wipers and washers and tailgate glass
- Pushbutton block
- Emergency light switch
- Fog light switch
- Rear fog light switch
- Interior lighting
- Luggage compartment lighting ceiling
- Heating, ventilation and air conditioning management
- Air conditioner switch
- Normal cooling mode
- Maximum cooling mode
- Rear door glass switch and rear exterior mirrors
- Controls for doors and windows and exterior rearview mirrors
- Inside rearview mirror
- Front seats
- Rear seat
- Seat belts
- Airbag
- Sun visors
- Front and back cup holders
- Cigarette lighter and ashtray
- Audio training
- Maintenance
- Location of major vehicle units
- Maintenance regulations
- Checking the car before leaving
- Checking the condition of the wheels and tires, rearranging the wheels
- Replenish the fluid level in the windshield washer tank and tailgate glass
- Replacing windscreen wiper blades and rear door glass
- Checking the oil level in the crankcase of the engine crankcase
- Replacing engine oil and oil filter
- Checking the coolant level
- Coolant Replacement
- Checking the fluid level in the brake and clutch hydraulic actuator tank, changing the fluid
- Pumping the brake hydraulics
- Clutch hydraulic pumping
- Checking the fluid level in the power steering tank
- Checking and replacing the oil in the manual transmission
- Automatic gearbox service recommendations
- Adjustment of tension and Replacement of a belt of a drive of the generator of the engine of 1,3 l
- Tension adjustment and replacement of 1.6 l engine drive belt
- Adjusting tension and Replacing the drive belt of the 1.3 l engine power steering pump
- Adjustment of tension and replacement of a belt of a drive of the compressor of the conditioner of the engine of 1,3 l
- Tension adjustment and engine air conditioner compressor belt drive replacement 1.6l
- Checking and replacing spark plugs
- Replacing the fuel filter
- Replacing the air filter replacement element
- Replacing the filter elements of the heating, ventilation and air conditioning system
- Checking the state of the suspension and transmission
- Wheel mount angles
- Steering status check
- Checking the technical condition of the brake system
- Adjusting the brake pedal free travel
- Adjusting the direction of the headlight beams
- Adjusting the beam direction of fog lights
- Repair on the go
- Wheel replacement
- Replacement of headlamp and marker lamps in the headlamp, tail lamps and brake light in the taillight
- Starting the engine from another car's battery
- Towing the car
G4Ea engine (1.3 l)
- Design description
- Checking the condition and replacement of the timing belt drive
- Replacement of the crankcase ventilation valve
- Replacing the cylinder head cover gasket
- Removing the engine
Power system
- Design description
- Fuel system pressure check
- Replacing the fuel level meter sensor
- Fuel module gravity replacement
- Removal of fuel rail and nozzles, nozzle check
- Idling regulator checking and removal
- Removing the throttle assembly
- Removing the fuel tank
- Removal of elements of the vapor capture system
- Air filter, resonator and duct removal
- Throttle drive replacement
Engine management system
- Design description
- Removing the electronic control unit (ECU)
- Checking and replacing the crankshaft position sensor
- Engine coolant temperature sensor removal 1.3 l
- Removal of engine coolant temperature sensor 1.6 l
- Checking and replacing the throttle position sensor
- Checking and replacing the detonation sensor
- Checking and replacing the camshaft position (phase sensor)
- Checking and replacing the absolute pressure and air temperature sensor
- Removal of oxygen concentration sensors
- Removing the speed sensor
- Removing a rough road sensor
- Ignition coil removal
- Removing the emergency fuel feeder switch
Cooling system
- Design description
- Replacing the 1.3l engine thermostat
- 1.6 l engine thermostat replacement
- Removing the radiator
- Removing the radiator fan
- Removal of the coolant pump on the 1.3 liter engine
- Removal of the pump coolant on the 1.6 liter engine
Exhaust system
- Design description
- Removal of catalytic collector
- Removal of the intermediate pipe
- Removing an extra silencer
- Removing the main muffler
Clutch
- Design description
- Clutch master cylinder removal
- Clutch hydraulic drive cylinder removal
- Clutch hydraulic hose removal
- Replacing the recycle bin and slave clutch
- Replacing the clutch actuator mechanism
Transmission
- Design description
- Replacing the front wheel drive oil seal
- Replacing selection gears and gears
- Removing and installing the gearbox
Front wheel drive
- Description of the construction
- Removing front wheel drive
- Removing and installing the outer hinge
- Removing and installing the inner hinge
Front suspension
- Design description
- Removing and disassembling the shock absorber rack
- Removing the front suspension arm
- Replacing the ball bearing
- Replacement of the stabilizer bar
- Replacing the stabilizer bar cushions, removing the stabilizer bar
- Removing and installing a stretcher
- Front wheel hub bearing replacement
Rear suspension
- Design description
- Removing the shock absorber
- Spring removal
- Removing the rear suspension beam
- Rear wheel hub replacement
Steering
- Design description
- Steering link replacement
- Removing the airbag and steering wheel
- Removing and adjusting the steering gear
- Pumping the power steering system
Brake system
- Design description
- Replacing front wheel brake pads
- Replacing rear wheel brake pads
- Removing the master brake cylinder
- Front wheel brake hose replacement
- Removing the front wheel brake disc
- Replacing the rear wheel brake cylinder
- Replacing the rear wheel brake hose
- Replacing wheel speed sensors
- Parking brake system elements removal
Electrical equipment
- General
- Relays, fuses and control units
- Ignition switch
- Removal of ignition switch contact group and immobilizer reader
- Rechargeable battery
- Removing the Battery
- Generator
- Design description
- Generator check
- Generator removal and disassembly
- Starter
- Design description
- Starter removal, replacement of traction relay
- Exterior lighting, light, interior and trunk lighting, sound
- Replacing the headlamp lamp
- Removing the headlamp
- Removal of the mouth and votes of another headlamp, replacement of the lamp
- Removing lateral turn signal, lamp replacement
- Removing the reverse light switch
- Removal of additional brake signal, lamp replacement
- License plate light bulb replacement, flashlight removal
- Rear fog lamp replacement lamp replacement
- Replacing the interior lighting ceiling lamp, removing the ceiling
- Replacing luggage lamp ceiling lamp, ceiling lamp removal
- Removing the toggle switches
- Beep
- Windshield washers & washers & rear window glasses
- Removal of the windshield wiper motor reducer
- Removing the rear door glass wiper motor
- Removing the windshield washer and windshield washer electric pump
- Removing the instrument cluster, replacing the lamps
- Removal of the electric fan of the heater, replacement of the resistor
Body
- Design description
- Removing the front cover shield
- Removing the bonnet lock and cable drive lock
- Removing the front flap
- Removing the front bumper
- Removing the rear bumper
- Removing the dirt shield
- Removing the rear exterior mirror
- Front door trim removal
- Removing the front door glass
- Removing the front door window mechanism
- Removing the exterior door handle and front door lock
- Rear door removal
- Rear door window removal
- Removing the rear door window mechanism
- Removing the exterior door and rear door lock
- Removing the rear door lock
- Removing the drawer
- Removing the dashboard overlay
- Removing the floor tunnel lining
- Removing the front seat
- Removing the rear seat
Troubleshooting
- Engine and its systems
- Transmission, chassis, steering and brakes
- Electrical equipment
- Body, heating, ventilation and air conditioning
Applications
- Repair tools
- Tightening torques for responsible threaded connections
- Fuel, lubricants, and service fluids used
- Spark plugs used in a car
- Car lamps
- Wiring diagrams
- Schematic of generator connections
- Ignition switch wiring diagram
- Wiring diagram for engine starting system (car with manual transmission)
- Wiring diagram for engine starting system (automatic transmission)
- Scheme of the engine control system (ignition system)
- Engine management scheme (fuel supply system)
- Engine control system (fuel injection) wiring diagram
- Automatic gearbox wiring diagram
- Reverse light lamp circuit diagram
- Braking signal activation scheme
- Schematic of instrument combination
- Airbag wiring diagram