Daewoo Matiz with engines of 0.8 liters and 1.0 liters, repair e-manual (in Russian)
About the manual
Engine types: F8CV / B10S1
Engine capacity: 0.8 / 1.0 l.
Power: 52 / 63.2 hp
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
About the manual
Engine types: F8CV / B10S1
Engine capacity: 0.8 / 1.0 l.
Power: 52 / 63.2 hp
In the manual you will find
- Instructions for repair of various vehicle components
- Information on self-service car
- Information on the design of the car and how to prevent failure
- The information for the trip to the service station, if the self-repair is impossible
Contents
Technical description
- General
- Specifications
- Passport details of the car
Safety and Maintenance
- DAEWOO MATIZ user manual
- Equipment and controls
- Car keys
- Doors
- Central castle
- Rear door
- Fuel tank fill tube
- Hood
- Car controls and interior fittings
- Ignition switch and engine start
- Instrument combination
- Control unit for heating, ventilation and air conditioning
- Control unit for power windows
- Rear-view mirrors
- Switches
- Headlight beam directional control
- Interior lighting
- Beep
- Shifter
- Shift lever (manual transmission)
- Gear lever (automatic transmission)
- Parking brake lever
- Front seats
- Rear seat
- Seat belts
- Sun visors
- Hours
- Storage box
- Cigarette lighter and ashtray
- Audio system
- Maintenance
- The location of the main units and units of the vehicle
- Checking the car before leaving
- Maintenance Regulations
- Checking the condition of the wheels and tires, rearranging the wheels
- Adding liquid to the windshield washer tank and tailgate glass
- Replacing the windscreen wiper and rear door glass brushes
- Checking the fluid level in the brake fluid reservoir
- Checking the fluid level in the power steering tank
- Checking the engine oil level
- Replacing engine oil and oil filter
- Checking the coolant level
- Coolant replacement
- Checking and setting the initial ignition timing angle on a car with 0.8 l engine
- Checking and replacing spark plugs
- Adjusting the tension and replacing the drive belt of the power steering pump
- Tension adjustment and alternator drive belt replacement
- Replacing the air filter element
- Replacing the fuel filter
- Checking the oil level in the manual transmission
- Transmission oil in manual transmission
- Transmission maintenance recommendations
- Clutch actuator adjustment
- Check the technical condition of the transmission, front and rear suspension
- Steering check and steering gear adjustment
- Checking the technical condition of the brake system
- Front wheel alignment angles
- Pumping of the hydraulic drive of the brakes, replacement of the brake fluid
- Adjusting the direction of the headlight beams
- Repair on the way
- Wheel replacement
- Replacing headlamps and headlamps in the headlamp
- Starting the engine from another car's battery
- Towing the car
1.0 liter engine
- Description of the construction
- Checking and adjusting thermal gaps in valve actuators
- Checking the condition and replacement of the timing belt drive
- Oil pressure sensor replacement
- Camshaft seal replacement
- Crankshaft front seal replacement
- Replacing the crankshaft rear oil seal
- Replacement of power unit supports
0.8 liter engine
- Description of the construction
- Checking and adjusting the thermal gaps 8 drive the 0.8 l engine valves
Power system
- Description of the construction
- Supply pressure test
- Removal and disassembly of the fuel module
- Removal of throttle assembly on the car with the engine of 1,0 l
- Removal of throttle assembly on the car with the engine of 0,8 l
- Check of the idle regulator and the throttle position sensor on the car with the engine of 1,0 l
- Checking and removing the idle controller on a 0.8l car
- Removal of fuel rail and nozzles, nozzle check
- Throttle drive cable replacement
- Removing the air filter housing
- Checking and removing the elements of the vapor capture system
- Checking and removing the elements of the exhaust gas recirculation system
1.0 l engine management system
- Description of the construction
- Removing the electronic control unit
- Checking and replacing the crankshaft position sensor
- Checking and replacing the camshaft position sensor
- Detonation sensor removal and inspection
- Checking and replacing the speed sensor
- Checking and replacing the absolute sensor air pressure in the inlet pipeline
- Checking and replacing the intake air temperature sensor
- Checking and replacing the oxygen concentration sensor
- Checking and removing the ignition coil block
- Checking and replacing the coolant temperature sensor
0.8 l engine control system
- Description of the construction
- Replacing the coolant temperature sensor
- Checking and replacing the throttle position sensor
- Checking and replacing the absolute air pressure sensor
- Checking and replacing the inlet air temperature sensor
- Replacing the ignition sensor cover and rotor
- Removal and installation of the ignition distributor
- Replacing the optical sensor
- Ignition coil check and replacement
Cooling system
- Description of the construction
- Coolant temperature sensor replacement
- Thermostat replacement
- Removing the expansion tank
- Removing the radiator fan
- Removing the radiator
- Removal of the coolant pump
Exhaust system
- Description of the construction
- Removal of exhaust manifold and front catalytic converter
- Removal of intermediate pipe with rear catalytic converter
- Removing an additional muffler
- Removing the main muffler
Clutch
- Description of the construction
- Removal of knots and clutch parts
- Clutch disconnect disconnect
Transmission
- Description of the construction
- Wheel drive oil seal replacement
- Replacing gear selection and gear
- Removing and installing the transmission
- Transmission front bearing front shaft replacement
Front wheel drive
- Description of the construction
- Removing wheel drives
- Removing and installing the outer hinge
- Removing and installing the hinge
Front Suspension
- Description of the construction
- Removing the cross-stabilizer
- Removing the front suspension arm
- Removal of the shock absorber
- Dismantling the shock absorber
- Front wheel hub bearing replacement
Rear Suspension
- Description of the construction
- Removing the shock absorber
- Spring removal
- Removing the longitudinal arm of the rear suspension
- Removing the transverse rod
- Rear wheel bearing replacement
- Removing the rear suspension
Steering
- Description of the construction
- Removing the steering wheel
- Removing the outer tip of the steering thrust
- Steering gear removal
- Removal of steering draft
- Removing the steering gear
- Pumping the power steering hydraulic system
Brake System
- Description of the construction
- Checking and replacing the vacuum brake booster check valve
- Replacing the brake pads of the front wheels
- Replacing rear wheel brake pads
- Removal of the master brake cylinder
- Front wheel brake brake hose replacement
- Removing the front wheel brake mechanism
- Replacing the brake disc
- Replacing the rear wheel wheel cylinder
- Removing the brake shield
- Replacing the rear wheel brake hose
- Removal of parking brake elements
Electrical equipment
- General
- Relay and fuse mounting blocks
- Relay and fuse mounting unit in the hood
- Mounting unit for relays and fuses in the passenger compartment
- Rechargeable battery
- Removing the Battery
- Generator
- Description of the construction
- Generator removal and disassembly
- Starter
- Description of the construction
- Starter removal and verification
- Lighting, light and sound alarm
- Headlight removal
- Removing the fog lamp, replacing the lamp
- Removing the front turn signal, replacing the
- Removing the side turn signal, replacing the lamp
- Removing the steering wheel switches
- Removing the Reverse Light Switch
- Removing the taillight, replacing the lamps
- Removing the license plate light, replacing the
- Replacing the flashlight lamp with additional brake signal
- Replacement lamp ceiling lamp
- Audio beep
- Windshield washer and washer cleaners
- Removing the windscreen wiper
- Removing the rear door glass cleaner
- Removal of electric pumps and tank of windshield washers and tailgate glass
- Removing the instrument cluster, replacing the lamps
- Removing the heater fan
- Removing the additional fan heater resistor
Body
- Description of the construction
- Removing the dirt guard
- Removing the front flap
- Removal of radiator trim
- Removal of the front bumper
- Removing the rear bumper
- Removing the exterior mirrors
- Removing the front door trim
- Removing the exterior handle and front door lock
- Removing the front door window
- Removing the front door power window
- Removing the front door glass
- Removing the rear door trim
- Removing the rear door lock and exterior handle
- Removing the rear door glass
- Removing the rear door upholstery
- Removing the rear door lock
- Removing the floor tunnel lining
Troubleshooting
- Engine and its systems
- Transmission, chassis, steering and brake
- Electrical equipment
- Body, heating system, ventilation and air conditioning
Applications
- Repair tools
- Tightening torques responsible threaded connections
- Applicable fuel, lubricants and operating fluids
- Lamps used in the car
Daew Matiz electrical equipment schemes